Описание

  • Adaptable for glass fiber-optic cables: reflex and through-beam mode
  • Adjustable time delay
  • Large detection range
  • Switching frequency: 1 kHz
These sensors are equipped for use with glass fiber optic cables but can be used with or without one. The transmitter and receiver are located in a single housing. The sensor evaluates transmitted light reflected back from the object and the output is switched as soon as an object passes the selected range. Bright objects reflect more light than dark objects, and can thus be recognized from greater distances.
Range 2000 mm
Switching Hysteresis < 15 %
Light Source Infrared Light
Service Life (T = +25 °C) 100000 h
Max. Ambient Light 10000 Lux
Opening Angle 12 °
Electrical Data
Supply Voltage 10...30 V DC
Current Consumption (Ub = 24 V) < 40 mA
Switching Frequency 1 kHz
Response Time 500 µs
On-/Off-Delay 0...1 s
Temperature Drift < 10 %
Temperature Range -10...60 °C
Switching Output Voltage Drop < 2,5 V
Switching Output/Switching Current 200 mA
Residual Current Switching Output < 50 µA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Protection Class III
Mechanical Data
Setting Method Potentiometer
Housing Material CuZn, nickel-plated
Full Encapsulation yes
Degree of Protection IP65
Connection M12 ? 1, 4-pin
Output
PNP NO/NC switchable yes
''